Minlak
custom titis
The name writes is self - “Duck for a Suck” - ie Call Duck for a SuckWhat, like that Jim bloke who does everything.....? "Minlak's Hobo-Blowing". I might pass the franchise fees & set up in competition.
The name writes is self - “Duck for a Suck” - ie Call Duck for a SuckWhat, like that Jim bloke who does everything.....? "Minlak's Hobo-Blowing". I might pass the franchise fees & set up in competition.
I know that feeling. A while back we had an 80s metal theme at work for a week or so.Fancy dress birthday parties.
Got invited to a 30th, had a rant about having to dress up and everybody who’s into that can fuck off……..
Turns out it’s 90’s themed. I don’t have change anything about how I dress. Ffs.
So now I’m gonna have a bunch of arshats running around in flanno’s and jeans with wigs all saying they’re eddie vedder, paying out on how I normally look. Fml.
At least booze is catered.
Slayer's Reign in Blood was 80's - still gets a regular play here80s metal theme
Slayer's Reign in Blood was 80's - still gets a regular play here
Every Friday is "Metal Friday" in my workshop.And you can bet your sweet pony's arse that it was thrown in with a lot of other great and some shit 80s tunes to fill the venue that week, but it was mostly hair metal. I copped grief for not dressing up...but then I copped friend because how I normally dress turns out to fit the itinerary. I looked like the lost member of anthrax. I also copped a fair bit of you listen to this shit? You'll have to ask my neighbours...
Everyone immediately seemed to assume it was going to be all Van Halen and Bon Jovi.
In my mind, you are trying to use chainring bolts that’s are too long…May the fucking idiot whomever invented chainring bolts never have a decent night's sleep again.
Umm, wot?...that’s are too long…
Nah, right size, swapping out an old for new. It's the backing/female side of the bolt that's a silly design - you either have to have a tool (which I'm guessing doesn't make things much easier as the recess where the tool grabs is shallow and narrow) that can't be used for any other purpose, or you have to make do with a large flathead screwdriver.In my mind, you are trying to use chainring bolts that’s are too long…
Assume that he means that I'm using a 3/2 rings set up for a 1 ring gig. But I'm not, right sizes, stupid design.Umm, wot?
These are available.Just make each size with a differing hex key head, FFS?!
It can’t work with a hex or torx on back. You’d be working with the male both sides. The slots are in the female.Just make each size with a differing hex key head, FFS?!
They are indeed, but I’m probably wrongly assuming again that Johnny is trying to remove.These are available.
SRAM do themIt can’t work with a hex or torx on back. You’d be working with the male both sides. The slots are in the female.
What crank/ring combo are you working on? Assuming not on the Hyrax? Most decent newer cranks have dropped those types of bolts.
And another thing! Why they have so many different sizes?!They are indeed, but I’m probably wrongly assuming again that Johnny is trying to remove.
I’ve only ever really had issues with the old slotted style when they are a bees dick too long, and they bottom out/bind before the ring is fully nipped up…..But Johnny say they aren’t…but it sounds like the sort of thing that causes the issue.