Search results

  1. willsy01

    Another new MTB park for Tassie.

    Couldn't find a post about it anywhere. http://flowmountainbike.com/post-all/maydena-bike-park-gets-the-green-light-from-the-tasmanian-government/ Sounds like a fairly epic development.
  2. willsy01

    Sold

    Item: 2013 Fox 32 Float 150mm CTD Factory Series 26" w/kashima Location: Sutherland Shire, NSW Item Condition: Very, very good. Stanchions unmarked. A couple of nics and scratches on the legs that come about from normal use. Reason for selling: Upgraded to a Pike Price and price conditions...
  3. willsy01

    Reverb can't keep it up.....

    I don't know much about these things (I have a Lev)......but what would cause it to not be able to stay up? Pressing the remote button sends it up but when you but weight on it, it drops a few inches. Air pressure is fine and it has been bled (although it will be bled again just to be sure)...
  4. willsy01

    WTB: Trail/AM bike LARGE frame

    Buddy of mine is looking to get back onto the trails and is after the above. He's about 6ft so MUST be a large frame 5"- 6" travel Not overly fussed on wheel size Prefer Shimano brakes Sydney based would be preferred initially, will look interstate if it's the right bike at the right price...
  5. willsy01

    Mobile bike repairs in Sydney

    I'll preface this with a note that I am in no way affiliated with these guys, I merely walked past one of them fixing some blokes bike at lunchtime. http://www.wheelyconvenient.com/ Looks like handy service. They've found themselves a good little niche in visiting bike rooms at large businesses!
  6. willsy01

    Cheap Fizik saddles at Atelier de Vélo in Sydney

    $50 a pop for: Arione VS Antares VS Arione CX Arione Donna Arione Donna 00 Cadel Evans Antares Antares Team Replica https://www.ozbargain.com.au/node/155693 I am in no way affiliated with the store. Just passing on a good deal.
  7. willsy01

    Henty commuter suitbag

    Chap at work got one of these over the weekend.......the bloke had a stall at the Salamanca Markets in Tasmania. Looks like a good idea to me. http://henty.cc/
  8. willsy01

    The Commencal of Procrastination

    Well it's taken a while, but I finally finished this thing during the week. Frame - 2012 Commencal Meta AM (courtesy of BigHair, thx bud) Rear shock - 2013 Float CTD (Chris Kovarik's!! Hopefully some of his skill was transferred) Front shock/fork - 2013 Float CTD 150mm Handlebars - Easton Haven...
  9. willsy01

    MTB rental in Sydney

    Friend of a friend is seeking to hire a medium or large carbon hardtail 29er to race in what i'm assuming is the Mount Beauty Enduro across the Anzac Day long weekend. Does anyone know of anywhere in Sydney that provide such a service? I've never heard of one myself, but that could be because...
  10. willsy01

    The Fly6 camera + rear light

    Handy thing http://fly6.com/ Yes, I know you can use a GoPro......this is a much cheaper solution however.
  11. willsy01

    Frameskin application

    So Frameskin make templates for basically every other frame in existence aside from mine. As such, i've bought a single sheet which I will somehow need to cut to size. Awesome. Tell me about some methods I can use to cut this bitch to size. I've been staring at it for the last 2 months dreading...
  12. willsy01

    Re-tapping threads

    Suggestions on who to take a frame to to have the ISCG holes tapped after the powdercoater filled the threads with powdercoat despite me saying they will be used? Please don't say Gripsport. I'm not sending it interstate to have three holes tapped. Thank you.
  13. willsy01

    Commencal people......help.

    I had grand plans of spending the Chrimbo holidays lovingly putting together my Meta......this plan fell apart last night. Long story short, I need one of these: It's the headtube seal for the internal cable routing. Without this, I cannot run some of my hoses/cables.......well, I can but...
  14. willsy01

    Generic praise thread: diymtb.com.au

    Big ups to Duncan at DIY......ordered and paid for some bearings after midday yesterday and have them in my hands less than 12 hours later. He's quick on the emails too. Tremendous service.
  15. willsy01

    Was anyone riding at Mt Cootha this morning?

    Powerful Owl more specifically.... http://www.couriermail.com.au/news/queensland/cyclist-killed-after-crashing-into-tree-on-mt-coot-tha-track/story-fnihsrf2-1226765788809
  16. willsy01

    GPS Bike Tracker

    So there's been quite a few people posting about having bikes stolen lately. Someone on another forum alerted me to this thing: http://www.integratedtrackers.com/GPSTrack/Spybike.jsp It drops into the headtube and is activated via vibration. So for those that have no coice but to store their...
  17. willsy01

    Do you own a Commencal Meta AM?

    If yes, please tell me which bottom bracket you are using. Commencal say it uses the BB92 standard, but the internet is telling me that Shimano's BB91 unit won't work with Hollowtech II cranksets. Halp!
  18. willsy01

    Cheap Camelbak Rogues - $50!

    catchoftheday.com.au have white and black Rogues for $50 plus postage. http://www.catchoftheday.com.au/event/29570/product/camelbak-rogue-2l-hydration-pack-white-black-213646 CRC sell them for $73 just to give you an idea. These are a great pack.....i've been using one for years and it...
  19. willsy01

    Buy 1 tyre, get the 2nd free at Velogear

    http://www.velogear.com.au/bike-parts/bike-tyres-bicycle-tubes/tyres.html Valid until the 19th of August.......not a huge range to pick from but a free tyre is a free tyre. Pretty sure you just get a second one of the same type as the freebie.
  20. willsy01

    Contour.......goneski.

    http://www.geekwire.com/2013/contour-closes-seattle-hq-surprises-employees-execs-mum-status-gopro-rival/
Top