My last Crossmark was absolutely riddled with bubbles like this (maybe 20 or more) when I finally caved in and changed the tire. It was so bad you could feel the wobble when riding smooth surfaces! I'd agree that it's the Stans causing it, but if you ride (hard!) enough you'll wear the tire out...
Shitloads of wire and a continuous welding device. They just string all the wire into the mesh shape and pass it through two massive rollers with a current flowing between them. As the joins in the wire pass through the rollers they are lightly welded together. Same way they make galvanised mesh...
It is relative, but only because the '9' girl subconsciously knows she has the ability (looks) to catch a '9' boy so she intuitively ignores all the '5' boys... unless they sit funny because of the fatness of their wallets.
How you'd create such a scale is beyond me - a lot of what the media...
Crazy room - Not even enough space for the obligatory queen bed!
I'd advise you to download yourself a copy of Google Sketchup - at least you can then draw it to scale. Yes, overkill for making a plan view, but it's good fun to play with and you might come out with a 3D render of the layout...
You'd be amazed where you can get using arborist tree climbing techniques. You just need big balls, heaps of skill, strength, stamina and all the gear!
I'd also imagine they'd use robotic cameras these days too.
A small amount of rotor rub is inevitable. It is also often temporary, and will come and go from one minute to the next.
It is often a matter of a fraction of a millimetre - so lets think about what might cause a fraction of a millimetre discrepancy:
thermal effects on the rotor
thermal...
Either one, or even both would be no reason not to buy them. Probably hundreds of thousands of people have enjoyed trouble free braking from their Avids but for some reason they cop a lot of misguided scorn on forums. It must be fashionable.
That's crazy talk! ;) I haven't had a single flat since going tubeless (touches wood) about 6 months ago and the sealant lasted well until about a week before xmas. Compared to changing a flat even once a fortnight that's a massive improvement.
Thanks for the insight, astroboy and FR drew. Seems like the arrangements re. contractors and management has a few flaws. Is a revised management strategy a likelihood? Anyone know?
Clearly they didn't properly assess how much work was required, and didn't see the boom in popularity coming...
You could try searching on this topic as there are as many opinions about this as there are users.
I'm going with at most 6 months, though you should probably be topping it up after 3. Ideally you remove the old stuff or else you end up dragging extra rotating weight around for no reason.
I said "unfortunately..."! I'm not advocating it, I'm just anticipating that this will be one of the compromises that will have to be made. The two major concerns the gov. will have will be their potential liability and damage to the environment; Their first and only local point of reference is...
Seems clear to me that the popularity of Stromlo (and MTB in general) has taken everybody by surprise. The number of major events is just part of the picture - any given sunny Saturday the place is chockers with punters.
I don't think the local gov. anticipated this at all, and so they threw...
I fitted a X9 28/42 set on my Pivot at the recommendation of my LBS - turned out the 42 ring was too big and was contacting the chain stay. They swapped them for the smaller rings (26/39) so it seems you can get X9 rings, but I think they might only come as a 2x set. No idea on price as they did...
You probably only need to resize the picture so it fits comfortably on screen. JPG's are already compressed and it's easy to make them look shit by aiming for too small a file size.
Irfanview kicks ass, it's free, and I reckon it's much easier to use and contains more features than anything...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.