Flow-Rider
Burner
They have 1 week off in early Oct so maybe just shut their site down over that period.
Yep. I think I bought mine from ZTTO. Works well.Anyone bought a hanger alignment tool off Ali?
ZTTO look to do a HAG 3 copy for about $40.
Cheers. Thinking the 2-3 times a year I will use if it does the job then be better than the $150 odd for a Park Tool.Yep. I think I bought mine from ZTTO. Works well.
I love a quality tool as much or more as the next person but it is such a simple tool you just don’t need anything more. I added a quick edit re Highlander to my post too.Cheers. Thinking the 2-3 times a year I will use if it does the job then be better than the $150 odd for a Park Tool.
Ha, main reason I was looking at getting one. Highlander has a clunky shift in the middle of the cassette. Limit screws all good, cable tension all good. So looking to be mech hanger. It was actually loose out of the box so thinking it probably got banged about in transit.I love a quality tool as much or more as the next person but it is such a simple tool you just don’t need anything more. I added a quick edit re Highlander to my post too.
After I got the tool I checked all my bikes. By far the Deviate Hanger was made of the softest and most pliable alloy.Ha, main reason I was looking at getting one. Highlander has a clunky shift in the middle of the cassette. Limit screws all good, cable tension all good. So looking to be mech hanger. It was actually loose out of the box so thinking it probably got banged about in transit.
Yep I have one too. Made a few modifications with set-screws to hold the different parts in place and to remove some of the play, but other than that it works just fine.Anyone bought a hanger alignment tool off Ali?
ZTTO look to do a HAG 3 copy for about $40.
Was looking at the Unior Hanger Genie as well bit similar story all reviews say it’s not that great. Cannot justify $400 for an Abbey Tools.Looks good. The Park Tool one is a pile of shit anyway so it can't be any worse.
Your Deviate deserves the best. For shame!Cannot justify $400 for an Abbey Tools.
Sorry. I will spray it green and write abbey on the side.Your Deviate deserves the best. For shame!
That's probably what they doSorry. I will spray it green and write abbey on the side.
Really ? I have had a DAG2 for ~10yrs, it's done overtime on 2 boys bikes since they day the first got a bike with a derailleur on it, plus my bikes. Estimated use of 100+ times and still as tight as the day I bought it.Looks good. The Park Tool one is a pile of shit anyway so it can't be any worse.
Thanks. Seems to be a common issue and don’t want to muck around drilling and tapping. Found this one which has a set screw at the top which looks to stop the indicator sliding about:Yep I have one too. Made a few modifications with set-screws to hold the different parts in place and to remove some of the play, but other than that it works just fine.
The bit that screws into the hanger is fine, just the o ring system and a bit of bent tin passes me right off. I hate that people think Park make quality tools, they are garbage with a thin veneer of marketingReally ? I have had a DAG2 for ~10yrs, it's done overtime on 2 boys bikes since they day the first got a bike with a derailleur on it, plus my bikes. Estimated use of 100+ times and still as tight as the day I bought it.
Havent tried it but it looks like imitation is the sincerest form of flattery...Anyone tried the Toopree Derailleur Aligner Hanger
https://www.aliexpress.com/item/1005003396637250.html?spm=a2g0o.productlist.0.0.1ce72517SmyZMd&algo_pvid=88e3e5fc-1760-4a52-b2c3-5a082e0a10bb&algo_exp_id=88e3e5fc-1760-4a52-b2c3-5a082e0a10bb-45&pdp_ext_f={"sku_id":"12000027507547731"}&pdp_npi=2@dis!AUD!65.64!29.53!!!!!@2101e9d316670837322966615ef605!12000027507547731!sea&curPageLogUid=Dx5fu9gcMvAT