Apparently DVO Diamond and Onxy...
I have been having strange stuff happen with my OTT settings on my DVO Onyx.
Was noticing it was changing from where I set it previously so over the last 2 weeks I set at 7, next things its 10, then to confirm again I set it at 6 next thing its 8.5.
I marked it today and checked every 2-3km... and watched that knob wind itself in just over 1 full turn on a short ride.
Seems its a widespread issue called 'OTT wind in' where the OTT adjuster winds itself in with fork use.
There are 100's of posts over on MTBR and the most common solution is to drill it and wire it or split pin it.
So its been done this afternoon... only a 1.5mm hole and a piece of 1.2mm wire through it. Will keep me going over the school hols (wherever we go).
I'll look at another solution like the 3D printed caps that someone is selling.
Unsightly but once the wire is removed the tiny hole is unnoticeable.
View attachment 383723
Will look at these caps or similar after x-mas when I get some time.
View attachment 383724View attachment 383725