I can get a new one for $150, but it would take a while to be shipped from Taiwan. The group set I have currently was purchased from one of the many people who buy a new bike with Eagle and strip it immediately to run Shitmano.Liked to be proved wrong, but why would anyone have one of these as a spare just lying around, and if they did, sell it for less than retail.
$500 and it's a deal.I’ll sell you one from MTBDirect for $200.
Sent from my iPhone using Tapatalk
Shitmano sit out of the way more....not striking things as much.many people who buy a new bike with Eagle and strip it immediately to run Shitmano.
*shim.....Shitmano sit out of the way more....not striking things as much.
A flog and their money are soon parted.
That's a bit of a reach (the protruding more bit), anyways it was a stick getting caught up, not anything to do with a strike. Could have happened to anyone running anything. In the 6+ years I've been running Sram this is the first time I've bent a mech. Good to see you've taken on the vernacular for Shimano.Shitmano sit out of the way more....not striking things as much.
A flog and their money are soon parted.
Mate needs a replacement mounting bolt for his brand new GX rear derailleur. SRAM reckons it needs 10-12 Nm and well that didn't work. Got a spare?Item: Sram XX1/X01/GX Eagle derailleur
Location: Melbs
Price range/Willing to Pay: up to $200
Extra Info: need asap
Am I missing something here Nauty? You'd rather pay $200 for a second hand one when mtbd has them in stock for $175 with free shipping?$500 and it's a deal.
I'd never go to 10 - 12Nm on those things. I most likely will have a spare unless, in some exceptionally fortunate circumstances, I can bend the damn thing back to exactly where it was. I'll post the results when I've had a crack at it.Mate needs a replacement mounting bolt for his brand new GX rear derailleur. SRAM reckons it needs 10-12 Nm and well that didn't work. Got a spare?
I'll definitely be buying one from MTB Direct unless I can get a GX for less than $175 or XX1/X01 for $200.Am I missing something here Nauty? You'd rather pay $200 for a second hand one when mtbd has them in stock for $175 with free shipping?
https://www.mountainbikesdirect.com.au/sram-gx-eagle-1x12-speed-rear-derailleur-long-cage
I’d try bolting the mech to a piece of wood and clamping it to a bench. Then you can yank on it without worrying about bending the hanger. Not sure if there is a proper way to do it but that’s how I’d go about it.I'd never go to 10 - 12Nm on those things. I most likely will have a spare unless, in some exceptionally fortunate circumstances, I can bend the damn thing back to exactly where it was. I'll post the results when I've had a crack at it.