VIC [FOUND] WTB: 110mm stem (31.8)

[beeb]

Item: Stem, ~110mm long, 31.8mm clamp diameter, preferably straight or no more than 7deg angle.
Price: Cheap!
Extra info: I'm in Victoria, but rural Vic - so will probably need it posted regardless. Black and minimal branding preferred. Need one to try out some 12deg backsweep bars and keep grips in roughly the same (reach) position
Example pic:

 

[Dales Cannon]

Let me have a look doc, might have somesing.

 

[Halo1]

I have a 90mm if that works?
Anything longer than 50mm is way too long these days.
It should be considered cheating, if there is a race with a photo finish and you have a stem twice as long as everyone else

 

[beeb]

I have a 90mm if that works?
Anything longer than 50mm is way too long these days.
It should be considered cheating, if there is a race with a photo finish and you have a stem twice as long as everyone else

Ta mate, but I have an 85mm on that bike currently so really need the extra stem length to get the grips back to roughly the same spot. It's for the 'gravel' bike not a normal MTB, so the long-stem stability is fairly crucial on old-school short and steep geo. But yeah, my normal MTB's run 50mm stems - a 110mm stem on them would be terrifying!

 

[Dales Cannon]

Got two.

 

[Rusty_68]

I've got these three if any of them are suitable?

DEDA Zero 100 (110mm @ 6 degree)
Ritchey WCS carbon wrap (110mm @ 6 degree)
Thomson Elite (120mm @ 10 degree)

 

[beeb]

Cheers @Rusty_68 - I've got one coming from @Dales Cannon, but if I look for a more "bling" option down the track I'll bear these in mind.

 

[Rusty_68]

All good mate. Glad you found one.