Recent content by qvack_au

Cheers thanks - haven't quite gotten around to it yet, but I'm pretty sure it must be leaking in two spots with that O ring looking pretty likely...

Done Done, legend.

How many dollarydoos would you be after for it? I'm either after something nice to replace the rp3, or something that'll tide me over until I fix it/break it in the process.

Nope, there's still a decent gap when I move 5mm past full compression on the old shock, and there's also the backup of swapping from 2.25 to 2.1 tires which would give me a bit more clearance on the FD too.

Double checked and all looks fine, shock has a clear path and nothing else in the way until the tire hits the frame

I can't see anything that would foul the shock on the travel, and I get 137mm as the shortest shock length before the back tire would hit the frame. Anything else to look for?

Well that probably says there's not 400 psi in there anyway, I can push it down with a screwdriver... I'll order the damper kit and shelve this for a bit as it looks like they have to come from overseas. Curious to see exactly what is wrong after all of this anyway, but for now I'll see if I...

Item: Fox float / rockshox RTD or similar for XC Location: Adelaide can pay for post Price range/Willing to Pay: $250ish depending on age Extra Info: the original shock was 190/45 so anything around there should work, it's going on an '06 rush.

So no luck at all unscrewing the head, even with a fair bit of force it wouldn't budge before the shaft moved in my vice. I've checked by putting air in the damper hole and it's coming out of a different spot than I thought. It bleeds straight through to the other end of the shaft. Based on the...

Cheers, will have a crack at it tomorrow and see if I have any luck

Nope. I've got a compressor but my schraeder adapter is buggered. I'll pick one up tomorrow and give it a go, I've been meaning to do it for a while anyway as getting tubeless tires to bead by hand is great fun. So to get that unthreaded do you need to break down the whole damper, or just clamp...

Only leak is through the hole in the photo I posted - I can feel pressure build up when pumping up the air chamber after blocking it with my thumb. There's no other leaks that I could see, I checked the valve thread first and the o-ring there looked fine. The rebound was the only part that...

Cheers, thanks for the info. I'm just getting air out the top, there was a little grease but no oil with the rebound knob. From the cutaway image it looks like the seal there is for the central shaft, which is linked to the nitrogen chamber, not the main one? The nitrogen still seems to be...

Uhh shouldn't admit I've got a gravel bike, road bike + costume and an electric cargo bike then?

It's pretty close? 5 is 6 for large values of 5 or something? Also got to be careful not to post too much or I'll be averaging more than a post per year