Hope x12 rear hub end caps (12 x 142mm) Need ASAP

[NASHWORTH]

Item: Hope x12 rear hub end caps (12 x 142mm) to suit a Pro 2 Evo.
Location: Anywhere within a 1.5-2 hour drive of Geelong.
Item Condition: Usable.
Price and price conditions: Will pay anything, can add beers if needed.
Extra Info: Need ASAP/Tomorrow, will drive to wherever to collect.

Cheers!
Nathan

 

[moorey]

Item: Hope x12 rear hub end caps (12 x 142mm) to suit a Pro 2 Evo.
Location: Anywhere within a 1.5-2 hour drive of Geelong.
Item Condition: Usable.
Price and price conditions: Will pay anything, can add beers if needed.
Extra Info: Need ASAP/Tomorrow, will drive to wherever to collect.

Cheers!
Nathan

Loan mine, return when you find a set in less of a rush. I'm in Ballarat.

 

[NASHWORTH]

Loan mine, return when you find a set in less of a rush. I'm in Ballarat.

PM'd you Moorey, cheers!

 

[Gripo]

Moorey, do you have rear "Evo" end caps to suit 10x135 thru axle...

 

[moorey]

Moorey, do you have rear "Evo" end caps to suit 10x135 thru axle...

Short answer....I think so. I've forgotten what half of these are (pro2/evo)

 

[moorey]

The one I bought off you was evo, 135x10, yeah?

 

[Gripo]

99.9% sure it was non evo...as I had to change "everything" ie. axle size/bearings to run a XD driver in my P2, essentially creating an Evo hub....

Hence I only need end caps...

 

[moorey]

99.9% sure it was non evo...as I had to change "everything" ie. axle size/bearings to run a XD driver in my P2, essentially creating an Evo hub....

Hence I only need end caps...

Bugger. It was one of those things I desperately needed...then haven't got around to fitting 12 months later.
Theres end caps on this though, innit..

 

[Gripo]

But that pack says bolt in.....so I presume it has end caps that take screw in bolts?

My understanding though is you could convert a P2 Evo back to a P2 as long as you have all beatings/axle/free hub washer?

 

[Knuckles]

The bolt ups should work, its the actual axle that's threaded. Bolt up and thru caps look the same.

In my defense, I thought Mexico started with M and ended in hoe...

 

[Gripo]

Mmmmk....I might have to borrow them M or make a CRC order...

 

[moorey]

But that pack says bolt in.....so I presume it has end caps that take screw in bolts?

My understanding though is you could convert a P2 Evo back to a P2 as long as you have all beatings/axle/free hub washer?

Does say bolt in, but it's through axle. Se type of slip on caps as the 142x12

 

[Gripo]

Can you slip that Superstar Co 10mm QR through it for me...

 

[moorey]

Can you slip that Superstar Co 10mm QR through it for me...

Already done. Like a glove.