fimpBIKES
Likes Dirt
Hi all,
with an upcoming trip to japan about to happen
and since i plan to hit up a DH park over there which offers some pretty serious rides for hire
i thought it was about time to FINALLY get on a dual suspension bike
(this is after 10+ years of occassional DH on a hardtail )
what did i get?
something OLDschool, just like me
Frame - Giant ATX something (about 2000 model)
Rear shock - Too short (only 150mm i-i)
Front shock/fork - Sherman with some fancy SPV valving or something
Handlebars - titec hellbent
Stem - titec el norte
Headset - FSA
Grips - ODI lock-ons, but probably swap to Ourys that i have for nostalgia
Saddle - just bent my azonic one that i loved, now has a FUNN one
Seatpost - MOST EXPENSIVE part on the bike, also the lamest. no name piece of shite that i got from the local shop (not drift, that shops GREAT)
Front brake -none yet, but have a hayes 8inch ready to put on
Rear brake - hayes 8 inch
Cranks - old school FSA lumps of aluminium
Chainguide - top is the AC, the bottom something i have knocked up from some spare rollers i had laying around. aerial industries bashy
Chain - meh
Pedals - dice ones
Front derailleur - bwahahaha
Rear derailleur - deore
Front shifter - oh dear...
Rear shifter - deore
Cassette - some shimano one
Front hub - unsure, 20mm bolt-thru
Rear hub - shimano
Front rim - dice 24
Rear rim - ryno lite, flatspotted badly...
Spokes - yes, lots
Nipples - teehee
Tyres - cheetahs
Tubes - dh ones
Total weight - 20kegs
the geometry is pretty messed up though
from what i have read on here the rear shock should have an i-i of about 190mm?
mine has about 150mm
which means as i pedal out of corners i am clipping pedals all over the joint and doing my best superman impressions...
going to chuck on a fox vanilla RC that i have, but thinking about getting one of these off torpedo7
http://www.torpedo7.com.au/products/MNSXCN7SS
hope u like it
with an upcoming trip to japan about to happen
and since i plan to hit up a DH park over there which offers some pretty serious rides for hire
i thought it was about time to FINALLY get on a dual suspension bike
(this is after 10+ years of occassional DH on a hardtail )
what did i get?
something OLDschool, just like me
Frame - Giant ATX something (about 2000 model)
Rear shock - Too short (only 150mm i-i)
Front shock/fork - Sherman with some fancy SPV valving or something
Handlebars - titec hellbent
Stem - titec el norte
Headset - FSA
Grips - ODI lock-ons, but probably swap to Ourys that i have for nostalgia
Saddle - just bent my azonic one that i loved, now has a FUNN one
Seatpost - MOST EXPENSIVE part on the bike, also the lamest. no name piece of shite that i got from the local shop (not drift, that shops GREAT)
Front brake -none yet, but have a hayes 8inch ready to put on
Rear brake - hayes 8 inch
Cranks - old school FSA lumps of aluminium
Chainguide - top is the AC, the bottom something i have knocked up from some spare rollers i had laying around. aerial industries bashy
Chain - meh
Pedals - dice ones
Front derailleur - bwahahaha
Rear derailleur - deore
Front shifter - oh dear...
Rear shifter - deore
Cassette - some shimano one
Front hub - unsure, 20mm bolt-thru
Rear hub - shimano
Front rim - dice 24
Rear rim - ryno lite, flatspotted badly...
Spokes - yes, lots
Nipples - teehee
Tyres - cheetahs
Tubes - dh ones
Total weight - 20kegs
the geometry is pretty messed up though
from what i have read on here the rear shock should have an i-i of about 190mm?
mine has about 150mm
which means as i pedal out of corners i am clipping pedals all over the joint and doing my best superman impressions...
going to chuck on a fox vanilla RC that i have, but thinking about getting one of these off torpedo7
http://www.torpedo7.com.au/products/MNSXCN7SS
hope u like it