NSW Downhill Parts needed!

42#KRISPY#42

Likes Dirt
Hey guys building up a dh bike and need quite a few bits and pieces!
Trying to keep it as cheap as possible, but if it's worth it i'll spend more.

Item: 24 inch Rear wheel.
Location: Central Coast NSW, postage is o.k
Condition: Aslong as its straight or close to it.
Price: You tell me!
Other: Doesn't hugely matter what it is at this point, aslong as its strong-ish

Item: Derailier Hanger to suit old 02 Norco Shore VPS frame
Condition: Straight and Decent!
Other: FOUND!!

Item: Cranks and BB
Condition: straight, fairly decent.
Other: Must be external BB, Again no preference to brand.

Item: Shimano Rear Shifter 8-9 speed *FOUND*
Condition: Decent.
Other: Model doesn't hugely matter

Item: 8-9 speed chain, sram/shimano
Condition: Decent!
Other: none

Item: Rotor bolts, as many as possible!
Condition: Decent!
Other: i keep losing the little buggers!

Item: Chainguide!
Location: Central Coast NSW, postage is o.k
Condition: Decent!
Other: No real preference to what. just something cheap to get me by!
 
Last edited:

nash

Likes Dirt
hey mate check out my sig its a custom a-line with over $1500 spent on it in new parts and i might be splitting

cheers
 

nicho

Sacré bleu!
hey mate,

got a set of used truvativ holzfellers cranks and bottom bracket in excellent nick. crank arms are 175mm and they are damn straight and work perfectly. the bottom bracket is for a 73mm bb max.

nicho
 

Tazed

Likes Bikes and Dirt
I also have some Holzfellers (170mm) with external ISIS BB (68/73mm BB).
Doouble ring w/bash, but would be perfect for a DH build.
Would only want about $60 plus postage for them...
In excellent condition - just one or two small nicks.
Can email pics if you PM me your email address.

I have a bag of unused Avid rotor bolts (with blue Loctite on them).
I can sell you enough for 2 sets of rotors.

I might have a 9 speed chain, too - I'll check tonight.
 
Last edited:

42#KRISPY#42

Likes Dirt
I also have some Holzfellers (170mm) with external ISIS BB (68/73mm BB).
Doouble ring w/bash, but would be perfect for a DH build.
Would only want about $60 plus postage for them...
In excellent condition - just one or two small nicks.
Can email pics if you PM me your email address.

I have a bag of unused Avid rotor bolts (with blue Loctite on them).
I can sell you enough for 2 sets of rotors.

I might have a 9 speed chain, too - I'll check tonight.
Pretty keen on the cranks! Just need to wait till i get my frame back from welders (cracked swingarm) and i'll measure the BB width! As for rotor bolts how much we talking for 12 or 18?
 
Top