Thanks mate sounds like they are worth a look.Got some centre lock rotors in the bits box. Let me dig them out and post pics. You can have them if you want them. Might be suitable, might be shite, cannot remember, saw them grabbing some M5 rotor bolts for a coil over plug cover (not a bike story). Not sure there is a matched pair in there though. They're, their.
Would be perfect, if you have them flick me a message.I might have some 160 CL rotors too
Thanks @Dales Cannon @droenn has a couple I'm going to look at on the weekend and if they don't work I'll grab the 64.
The SM-RT64 is 160mm diameter, the only centrelock wheelset I had was on the Trek Fuel that I gave my niece's sons. It is in pretty good nick. I upped the front rotor to 180 before handing it over. The SM-RT77 was a gift from someone who hated me and the old old Hope 5 bolt jobbie was from a chariot used by a gladiator in the reign of Domitian caeser. Probably an heirloom now worth nearly $1.
If you want the 64 I can post it to youse.
@Dales Cannon would it be possible to get the width of the SM-RT64 rotor? It will be going with formula brakes so hopefully it's still got plenty of meat.
The SM-RT64 is 160mm diameter, the only centrelock wheelset I had was on the Trek Fuel that I gave my niece's sons. It is in pretty good nick. I upped the front rotor to 180 before handing it over. The SM-RT77 was a gift from someone who hated me and the old old Hope 5 bolt jobbie was from a chariot used by a gladiator in the reign of Domitian caeser. Probably an heirloom now worth nearly $1.
If you want the 64 I can post it to youse.
Yes@Dales Cannon would it be possible to get the width of the SM-RT64 rotor? It will be going with formula brakes so hopefully it's still got plenty of meat.
that is 0.00175 meters if that's easier1750 microns. Very little wear.
Metres unless your meter is a single dimension length equal to a metre.that is 0.00175 meters if that's easier
0.00000175 kmthat is 0.00175 meters if that's easier