Plankosaurus
Spongeplank Dalepantski
Can't get the wiring right, but otherwise peachyTried to 3D print one of those LED butt plugs yet?
Sent from my G8441 using Tapatalk
Can't get the wiring right, but otherwise peachyTried to 3D print one of those LED butt plugs yet?
What printer did you get Planko? Finished print looks pretty good.Played with the new 3d printer - 32mm and 35mm fork seal drivers
Next trick will be to make some chain guides and tacos and see how they hold up. Maybe look at shock hardware too, because making my own would be much better than waiting weeks for the right thing then finding I ordered the wrong size.
Sent from my G8441 using Tapatalk
Creality ender 3 - fairly cheap but all reports say it punches well above its weight.What printer did you get Planko? Finished print looks pretty good.
Got any prototypes?Can't get the wiring right, but otherwise peachy
Sent from my G8441 using Tapatalk
...in theory.Now I won’t have to go searching for something that might or might not be in the garage, mancave/office, or jammed under some shit somewhere.
Much harder than choosing the right one is your next step - learning to put things away.Bought myself a Bunnings level tool chest. (Slathered it with the obligatory MTB stickers) and a oh so nice set of Wera hex keys!
First ever proper tool chest. Almost feel like a real MTBr now!
Now I won’t have to go searching for something that might or might not be in the garage, mancave/office, or jammed under some shit somewhere.
I’m thinking I should have have got the next size up though. View attachment 367084
Much harder than choosing the right one is your next step - learning to put things away.
Yes you are both 100% correct, bloody killjoys....in theory.
Fixed.On reflection the photo is a complete fail. It should be on the oven. I promise to do better next time
I tried but it wouldn’t fit under the range hoodFixed.
I tried but it wouldn’t fit under the range hood
... why did I not think of that when stripping the STP. Painting the stripper on was a PITA. Looks good.got the Tranny back today and started stripping back the paint
this is the result of about 15min work and 2 cans of gasket stripper.
Please. If you won't buy the bottle opener atleast pick up one of these.Used it as a prop to play around with my camera.
Trying to get settings right for a light painting technique. This was a 30 sec exposure.