TAS Hope nds rear hub bearing

Lucaw

Lucaw

Next in line
Item: Hope nds rear hub bearing, 17x 30x7
Location: Hobart
Willing to pay: you tell me
Extra info: the rear wheel on the crafty has some play, and upon inspection the nds bearing was cracked. I have an almost complete set of replacement bearings, except for the one I need
 
PJO

PJO

in me vL comy
Sounds like a 61903 bearing.
You can get an SKF is 61903-2RS1 from Tas Bearing and Chain https://tasbearing.com.au/.
I know they currently don't have any of these in stock in Hobart but can get them here from Launceston, you would have to ring and ask them. Cost $16.28 + GST
Have bought single bearings from these guys before.

Also https://www.statewidebearings.com.au do NSK and FAG bearings, not sure what they have in stock. If buying NSK you would want 6903 DDU (rubber contact seal) bearings.
 
Last edited:
PJO

PJO

in me vL comy
moorey said:
You sure about that? Pro2 had a piddly thin axle prone to snapping in the 12mm model. @Labcanary will know for sure, you may be right.
Click to expand...
Reckon so, I think the piddly thin axle was because of the freehub bearing in the Pro2. It only has an inner diam of 15mm:
See number 8 in the above Pro2 exploded view. The Pro2Evo has a 17mm bearing and thus axle would be more meaty...
 
Labcanary

Labcanary

One potato, two potato, click
moorey said:
You sure about that? Pro2 had a piddly thin axle prone to snapping in the 12mm model. @Labcanary will know for sure, you may be right.
Click to expand...
Hub shell bearings are the same in pro2 and pro2 evo. Freehub bearings are different between the two. Edit: Whoops, forgot about pro4. Hub shell bearings are the same between pro2 Pro2 evo and pro4.
 
moorey

moorey

call me Mia
You must log in or register to reply here.
Top