Doesn't make any difference they are all the same bearing size.Pro2, Evo, 4?
You sure about that? Pro2 had a piddly thin axle prone to snapping in the 12mm model. @Labcanary will know for sure, you may be right.Doesn't make any difference they are all the same bearing size.
Reckon so, I think the piddly thin axle was because of the freehub bearing in the Pro2. It only has an inner diam of 15mm:You sure about that? Pro2 had a piddly thin axle prone to snapping in the 12mm model. @Labcanary will know for sure, you may be right.
Hub shell bearings are the same in pro2 and pro2 evo. Freehub bearings are different between theYou sure about that? Pro2 had a piddly thin axle prone to snapping in the 12mm model. @Labcanary will know for sure, you may be right.
Cheers. And pro4 same?Hub shell bearings are the same in pro2 and pro2 evo. Freehub bearings are different between the two.
Jah.Cheers. And pro4 same?
$15 delivered before Christmas. Mad not to.I've used these before:
17x30x7mm Bearings (2) HPI Baja 5B 5T Gearbox Bearing 1:5 B092 PRC KM PTFE Seal | eBay
This bearing is used mainly on the HPI Baja 5B and 5T 1:5 scale Petrol cars. PTFE Heat Resistant Rubber Seals. This is the standard steel for most ball bearings. It also has superior low noise qualities to standard 440 grade stainless steel.www.ebay.com.au