The welds are incredibly nice.I love the welds in that last pic. What an amazing looking bike!
Don't think I will be breaking it like my banshee.
The welds are incredibly nice.I love the welds in that last pic. What an amazing looking bike!
Old rim had 2x dings that made it a real battle to seal the tyre along with a flat spot. Was happy with EX511.What happened to the old rim? Didn't want to upgrade to Fr560s?
How did you go with the weight of the bike over the weekend? I'm wondering how fit I will need to be to make mine work.
Sent from my M2012K11AG using Tapatalk
Really really good. Nice rounded profile when mounted, superb grip and roll well. Cant fault them as an all rounder tbh.How do you find the MSC tyres?
Well done in the race too!
Did you order the tyres thru these guys?Really really good. Nice rounded profile when mounted, superb grip and roll well. Cant fault them as an all rounder tbh.
Have them on both bikes now.
Ordered some off them some from BikeInn. Come out of Canberra if I remember correctly. Didn't have any delays of the like.Did you order the tyres thru these guys?
I've ordered them and zero response in 8 days.
Bummer. Can be fixed with different crowns.Very nice fork shame I got sent the wrong offset
View attachment 391702
Trying out a 30mm stem and the new Conti's
View attachment 391703
Drum roll? Betting you have something from Dave?Very nice fork shame I got sent the wrong offset
View attachment 391702
Trying out a 30mm stem and the new Conti's
View attachment 391703
Is it the internal air shaft, or a part of the stanchion? Have you tried Dougal at Shockcraft?NSR advised I'd done a number on the Dorados.
Air shaft has cracked where it screws onto the valve at the top cap - pretty serious as this is pretty much the only structural part holding the fork together when it tops out.
Probably a long shot. If anyone has or knows of someone with older Dorado Pros 2009+ laying around I'm I need the assembly (Compression Rod 141 25983 -- 26 & 27.5")
No current ETA from Manitou USA unfortunately.
View attachment 392782
Might be long shot but try here? https://www.shockcraft.co.nz/forks/find-your-fork/manitou-doradoAir shaft has cracked where it screws onto the valve at the top cap - pretty serious as this is pretty much the only structural part holding the fork together when it tops out.
Probably a long shot. If anyone has or knows of someone with older Dorado Pros 2009+ laying around I'm I need the assembly (Compression Rod 141 25983 -- 26 & 27.5")
Report on the Tech 4s after some ride time would be ace. Only had 3 rides on Dominons. Lots of power but lever feel not as nice as Hope.Hope Tech4 E4 brakes added and 5mm longer mutators. Corrects HA to 61.9°
View attachment 393750