marc.r
Likes Dirt
Hi Guys,
So its a rainy afternoon and I have all the tools so i decided to have my first go at servicing the lowers on my Pike.
So far I have removed followed the sram instructions and youtube videos but its not working as it should.
1. removed the air.
2. removed the rebound bolt.
3. undid the both bottom bolts half way.
4. gave them a few solid taps with the rubber mallet.
5. fully removed both bolts. (oil fell from air spring side not the damper side)
6. tried to pull off the lowers but no - feel like its getting progressively more vacuum and then comes to a spot where it won't move any further.
7.... re installed the bottom bolts and tapped and tried removing again - no change.
Anyone offer a suggestion?
So its a rainy afternoon and I have all the tools so i decided to have my first go at servicing the lowers on my Pike.
So far I have removed followed the sram instructions and youtube videos but its not working as it should.
1. removed the air.
2. removed the rebound bolt.
3. undid the both bottom bolts half way.
4. gave them a few solid taps with the rubber mallet.
5. fully removed both bolts. (oil fell from air spring side not the damper side)
6. tried to pull off the lowers but no - feel like its getting progressively more vacuum and then comes to a spot where it won't move any further.
7.... re installed the bottom bolts and tapped and tried removing again - no change.
Anyone offer a suggestion?