Search results

  1. 4

    Hi Wooogy, are these 100 or 110mm spacing?

    Hi Wooogy, are these 100 or 110mm spacing?
  2. 4

    VIC Reba RL 27.5 100mm 15mm axle - SOLD

    Sorry, I ended up using them on my daughter's bike which is total overkill, but I couldn't be bothered taking them off now. I forgot to remove this ad though.
  3. 4

    Sold DT Swiss 370 hub

    Bugger, sorry JV, just noticed it has an XD driver, won't work for me.
  4. 4

    Sold DT Swiss 370 hub

    Hi JV, $60 posted to 3749?
  5. 4

    VIC Reba RL 27.5 100mm 15mm axle - SOLD

    Item: RockShox Reba RL 27.5 Location: NE Victoria Item Condition: Excellent condition. One year old and lightly used. One or two minor marks on the lowers, stanchions perfect. Reason for selling: Going 29/27.5+ Price and price conditions: $300 Extra Info: 15mm axle, 100mm travel, they were on my...
  6. 4

    percentage of riders who use Strava

    Actual percentages... So this thread is long dead and had completely digressed but I'm going to take it back to its original point. We've had a trail counter on the entrance to 3 of our four loops here at Yackandandah, and of the 2200 riders who've passed the counter in the last 2 months around...
  7. 4

    Confessions from the fuckwits

    Just unscrewed and then tried to pull apart my Fox RP23 and found it a bit hard by hand so attached the bottom eyelet in a vice and started pulling on the top eyelet. A lesson for young players here is that those two eyelets are connected by a very strong shaft and no amount of pulling on those...
  8. 4

    Can't separate Fox RP23 air sleeve

    Yep, absolutely, I've always wanted to end up as part of someone's Rotorburn signature and I guess tonight's effort would just about do it.
  9. 4

    Can't separate Fox RP23 air sleeve

    Ha ha, that's exactly what I was doing in the vice, there was no way I was going to pull that shaft apart! Inverted the shock so the vice was gripping the upper eyelet, got a better grip on the body and it finally popped off. The only dumb question is the one you don't ask. Thanks Zaf.
  10. 4

    Can't separate Fox RP23 air sleeve

    I've turned the rebound dial fully clockwise as Zaf suggested and I've tried the propedal lever on every setting, is that what you mean?
  11. 4

    Can't separate Fox RP23 air sleeve

    So the 1200 x 600 stump that the vice is attached to is tilting off the floor and the screwdriver in the eyelet is bending, surely it shouldn't need that much force? Is there any other setting that might be causing it to stick? I've never come across this before.
  12. 4

    Can't separate Fox RP23 air sleeve

    I must be doing something wrong here but I've let the air out and unscrewed it as far as it will go but it won't separate. There is a tiny amount of movement between the two sleeves but nothing more than that. Any ideas? It's a boost valve model if that makes any difference.
  13. 4

    percentage of riders who use Strava

    Does anyone have any idea of what percentage of trail riders would use Strava? I realise it won't be a particularly reliable figure but we're trying to get an idea of total numbers of riders on the tracks here in Yackandandah based on Strava figures. Eventually we'll get a counter and be able to...
  14. 4

    Yackandandah XC Trails (Yack Tracks)

    Signposting is ongoing, the Digger's Loop is complete however the other loops are being done this weekend. If the weather permits they should all be done by this Sunday. The signage starts from what will be the official trackhead just past the bridge below the reservoir, (check the map in the...
  15. 4

    Yackandandah XC Trails (Yack Tracks)

    46 km of signed XC trails are set to open on October 8 and 9 just outside of Yackandandah in NE Victoria. These tracks have been built by local riders in conjunction with DELWP and their management is overseen by a committee of local volunteers (Yack Tracks Inc). All built by hand, the tracks...
  16. 4

    2016 Hard Yacka 3 hour Yackandandah Victoria Oct 9

    Entries are now open for the new format Hard Yacka, a 3 hour event now which will be based in the newly approved XC single track around Yackandandah. www.hardyacka.com.au This will be the first event to be held on the 50km of trails in the Stanley State Forest adjacent to Yackandandah 3-4...
  17. 4

    Giant PXC2 27.5 rims setup tubeless with Bontrager Rhythm rim strip?

    Tubeless solution to PXC2s Re-hijacking the thread back to the original topic! I tried the velocity tape (25mm wide) and completely screwed it up. I found it incredibly difficult to push it down into the depths of the rim without it folding or bubbling so it failed to hold any air. A mate of...
  18. 4

    Giant PXC2 27.5 rims setup tubeless with Bontrager Rhythm rim strip?

    What I've learnt so far I posted this question on the MTBR forums also and there was one reply from a rider who said they had this setup and it worked well but there aren't any details as to exactly which parts were used or which rims. Perhaps the rim strips or PXC2 rim in the US are a little...
  19. 4

    Giant PXC2 27.5 rims setup tubeless with Bontrager Rhythm rim strip?

    27.5? Is the rim profile the same as 29er rims do you know? With or without the original rim tape?
  20. 4

    Giant PXC2 27.5 rims setup tubeless with Bontrager Rhythm rim strip?

    I can't vouch for the consensus but I would think that's only f- wit worthy if you weren't bunny hopping or at least trying to. Regarding the tubeless transition, don't be put off by not being able to run the low pressures of lighter riders, you'll still be able to run relatively lower pressures...
Top