Search results

  1. camzh

    LOST Lost GoPro

    Hey Peeps. I lost a GoPro yesterday while riding the Fire Trails around Darkes Forest / Appin NSW. It's complete with the holdy handle thing. From what I can tell, it was lost some where between the 10Q Trail, most the way along the 10B trail to the weir. I re-rode the sections that I was on...
  2. camzh

    Little Things You Hate

    LTIH: Nuke Proof and their shitty customer service, makes me hate their old products that you can't get spares for. Or maybe you can get parts ? But their service has no fucking idea !!!!! Next time i'll just pony up and buy the Hope.
  3. camzh

    AM 2011 Norco Range 1

    Thanks buddy. I dont know why Norco can't make this info available to the average punter :) Now i've just gotta keep an eye out in the FS section for one
  4. camzh

    AM 2011 Norco Range 1

    ^ I dont think so. The shock that is in there is 8.75" eye to eye (2.75" stroke) And while Norco dont publish that info, and havent responded to my enquiries I believe it is meant to be 8.5"x2.5" It's one of those things I'd like to get sorted out.
  5. camzh

    AM 2011 Norco Range 1

    Rebuild time ! It was suggested that this was used as some mechanism to jump start the car, but no, I'd just changed the battery... After stealing the Fork for the Blindside I needed a new fork. While I was open to pretty much anything an older TALAS turned up at a great price (thanks RB...
  6. camzh

    AM 2011 Norco Range 1

    Frame - 2011 Norco Range Rear shock - 8.75"x2.75" Fox DHX RC4, now fitted with 2.8"x550lbs (I bought it with a 3.25"x400lbs) Front fork - Fox TALAS 36 (2009?) 100,130,160mm adjust (I bought it with a 140-180mm TALAS) Handlebars - Nukeproof Warhead 780mm ? Stem - Transition Temple Lite Headset...
  7. camzh

    Remote control cars

    I have one of these too. 2S is fast enough, but 3S just takes it to something unusable other than speed runs. Mine did in the rear diff, but not too hard to fix it. Other than the original steering servo being junk and my Mrs smashing the front a-arm its been very robust.
  8. camzh

    Transition BlindSide

    Yes, It does look a lot better now than it started out :) I would love to have matching greens, but in reality it just wasnt going to work out. As the greens are different on different components I'm ok with it, none of the greens are touching. The sticker on the fork is the most different...
  9. camzh

    Transition BlindSide

    Thanks Mick. Same forks in all the pics. I pulled off the stickers and plasti-dipped them black. In hind sight I think paint would have been a better idea..
  10. camzh

    Transition BlindSide

    New wheels got built up late last week and when on this weekend. She's now looking like this:
  11. camzh

    Transition BlindSide

    Got some new stickers and cut my cables. Also replaced the bent seatpost with a smaller one and a shim. 27.2-30.4mm shim works well on a 26.8mm post into a 30.0mm tube. Ordered spokes, nipples and a front hub today. New wheels are NS Trailmaster 2. Hubs are DT 350 in the rear and Sun Ringle...
  12. camzh

    The discount code thread

    Thanks! I used the $10 off.
  13. camzh

    FOX Talas travel Adjust Speed

    They have always done this since I've had them. They have been serviced in this time and I didnt mention it as I didnt realise it was worthy of mention. They guys that did the service didnt mention it. I think they are from around 2011.
  14. camzh

    FOX Talas travel Adjust Speed

    I've got a set of 180 Talas that seem to be very slow to change between the travel options... Is this normal ? As in to go from 140mm to 180mm will probably take about a minute. Other travel adjust forks seem to be rather quick. I've just picked up a 2nd had set of 160mm Talas' (which are...
  15. camzh

    What size spring for rear shock ?

    As above, If you need to tighten it a lot to get the right feel you need a stiffer spring.
  16. camzh

    Transition BlindSide

    Still yet to get some real time on the bike :(
  17. camzh

    Transition BlindSide

    So I'm a bit of a Transition Fan and been looking for a more FR/DH orientated rig. This frame turned up and the build began. It's now kinda complete and yet to be ridden in real anger. Frame - Transition BlindSide V2 Rear shock - DHX 5 Front shock/fork - Fox Talas 180 Handlebars -...
  18. camzh

    Norco Range 2011 Shock Size

    thanks buddy, that didnt show up in my searches. I figured 8.5" x 2.5" would fit, but I didnt know if it was correct.
  19. camzh

    Norco Range 2011 Shock Size

    I've been searching but I can't find the info I'm looking for. I bought a 2011 Norco Range a while back and it came with a DHX RC4. This isnt the standard shock and I dont know if its the right size, its a 8.75" x 2.75" It seems to fit but its a rather large size for an all air shock (which...
Top