beeb
Dr. Beebenson, PhD HA, ST, Offset (hons)
That bit I’m good with. It’s weird, it seems like the cable guide is the right way for the cable pull direction, but it’s like the spring is wound the “wrong way”. I tried winding it the amount it recommends, which didn’t work - then I tried winding it a bit more and ended up just bending the lowest coil of the spring. Whoops. Not quite as easy as factory as this isn’t a remote-specific damper, so I’m having to bodge it a bit…I've found the Grip remotes to be tricky to set up. Best method I've found is to switch the lever on, then use an allen key to turn the dial to full lock, then connect the cable. Releasing the lever then opens the damper.